为您找到"
16334a
"相关结果约100,000,000个
The 16334A is a test fixture for impedance evaluation of SMD components with a minimum size of 1.6 x 0.8 mm. It has tweezer's contacts to hold the DUT and is compatible with Keysight LCR meter and impedance measurement products.
The 16334A must be directly connected to the four-terminal pair port of the E4990A. More than 30 minutes warm-up time is required after turning on the E4990A. Press Preset. Press Cal > Accessory > 16334 (15 MHz max). Press Cal > Adapter Setup. Put the device contacts of the 16334A into the OPEN condition.
This manual describes basic information needed to use the 16334A. It provides a product overview, specifications, typical characteristics, operation, and service information. Required field Please enter valid Email address
The 16334A is a product from Keysight that can be used to hold and manipulate small components during testing. It is available at Mouser for $1,636 per unit and has a factory lead-time of 4 weeks.
The Keysight 16334A is a direct attachment, 4-terminal pair type fixture which is equipped with a tweezer type probe for measurement of leadless components such as chip capacitors. The tweezer tips are replaceable. The distance between the tweezer tips is continuously adjustable according to the distance between the DUT terminals.
Download the PDF document for the operation and service manual of the Keysight 16334A test fixture, a device for testing and measuring electronic components. Learn about the safety precautions, specifications, warranty, and contact information for this product.
The Keysight 16334A Test Fixture is designed for use with instruments, type of LCR/Impedance meter. The 16334A is a direct attachment, 4-terminal pair type fixture which is equipped with a tweezer type probe for measurement of leadless components such as chip capacitors. The tweezer tips are replaceable.
Keysight 16334A Tweezer Test Fixture. Description: This test feature is designed for impedance evaluations of SMD. The minimum SMD size that this fixture is adapted to evaluate is 1.6(L) x 0.8(W) [mm]. The tweezers contacts on this fixture makes it easy to hold the DUT.
16334A Tweezers Contacts Test Fixture. Calibration and Repair. Request Service. Download Brochure Product Details. Resources; Drivers, Firmware and Software; Training and Events ; Knowledge Center ; Sort by : Date . Date Title. Filter Results No information found for this product Reset. By Type of Content ...
This document covers the operation and service of the Keysight 16334A test fixture, a device for testing electronic components. It contains notices, disclaimers, licenses, and safety information for the product.