为您找到"
rct203
"相关结果约100,000,000个
RCT203 .000-999999 count range with absolute accuracy, .06-300000 RPM with ultra accuracy of 0.05% of reading Programmable setpoints, scale factor Application : Totaliser, RPH, RPM, RPS, Meters/Minute, Mains Frequency etc.
RCT203 is a programmable counter and RPM indicator used to counts events, measures frequency, motor-speed, and cable length as well as measure motor and shaft speeds up to 5000 Hz. It can count up, count down, bidirectionally as well as in quadrature. RCT203 accepts input from proximity switches, photoelectric switches, voltage pulses, limit switches, electromagnetic pickups amongst others ...
RCT203 is a programmable counter and RPM indicator used to counts events, measures frequency, motor-speed, and cable length as well as measure motor and shaft speeds up to 5000 Hz.
RCT203 is a programmable counter and RPM indicator used to counts events, measures frequency, motor-speed, and cable length as well as measure motor and shaft speeds up to 5000 Hz. It can count up, count down, bidirectionally as well as in quadrature.
'RCT-203 Riri Koda (Miri Koda, Miki Iwashita) ROCKET 720p 2010 SubRip .srt' was first produced and released in Japan with the 5 May, 2010 release date.
RCT203 is a blue Volvo S80 from 2000, currently not in traffic. It has a petrol engine with 140 hp (138 bhp) power and an automatic, 5-speed transmission. It accelerates from 0 to 100 km/h in 11.4 sec. The combined fuel consumption is 9.6 l/100km and the average emission is 229 g/km.
RCT203 is a programmable counter and RPM indicator used to counts events, measures frequency, motor-speed, and cable length as well as measure motor and shaft speeds up to 5000 Hz. It can count up, count down, bidirectionally as well as in quadrature. RCT203 accepts input from proximity switches, photoelectric switches, voltage pulses, limit switches, electromagnetic pickups amongst others ...
The RCT203 is a programmable rate indicator and totalizer that can measure rates up to 5KHz and totalize up to 999999 counts. It has inputs for proximity switches, voltage pulses, limit switches, and electromagnetic pickups. The display is a 6-digit LED and it stores settings in non-volatile memory. It can be programmed for scale factor, base number, exponent, reset, rate unit, and minimum ...
RCT203 .000-999999 count range with absolute accuracy, .06-300000 RPM with ultra accuracy of 0.05% of reading Programmable setpoints, scale factor Application : Totaliser, RPH, RPM, RPS, Meters/Minute, Mains Frequency etc.
Application : Event counter, Totaliser, Batch counter, RPH, RPM, RPS, Meters/Minute, Mains Frequency, Zero-speed switch, etc.