为您找到"
seam test
"相关结果约100,000,000个
SEAM yields detailed qualitative information on children's social-emotional competence, identifies their caregivers' strengths and areas of need. ... Test-retest reliability (SEAM and SEAM with Ages) Infant: 0.987 p < .01 Toddler: 0.968 p < .01 Preschool: 0.989 p < .01: Concurrent Validity (SEAM and SEAM with Ages)
5.2 This test method can be used to determine the sewn seam strength and sewn seam efficiency of critical sewn seam assemblies with each fabric. Because sewn seam strength and sewn seam efficiency varies with each fabric, both of the standard seam assemblies, noted in Table 1, should be used when comparing the seam strength of different fabrics. ...
Seam strength is a comparison test between an unseamed test piece of fabric and the seamed fabric specimen. The specimen is pulled in tension, similar to a grab test, until it breaks. If the unseamed portion fails before the seam fails, the woven textile is said to have 100% seam efficiency. If the seam fails at say, half the breaking strength ...
ASTM D1683 is a test method used in seam engineering to determine the sewn seam strength in woven fabrics by applying a force perpendicular to the sewn seams until seam failure occurs. Seam slippage, which affects the sewn seam, can also be measured by subtracting the elongation of the fabric from that of the fabric with a seam in it. ...
ASTM D1683: Standard test method for failure in sewn seams of woven fabric, 1990. ASTM D 751: Seam strength, 1995; BS 3320:1988: Method for determination of slippage resistance of yarns in woven fabrics. (seam method). AS 2001.2.20-2004: Determination of seam breaking force in this testing method.
The most important characteristic of any seam is seam strength. How to determine seam strength: The simple method of determining seam strength based on two parameters. For lockstitch: Approximate seam strength can be determined as the number of stitches per inch multiplied by the single thread strength multiplied by 1.5. Seam strength = SPI x ...
Seam strength of woven fabrics is tested by stretching a specimen of a specified size (with a seam in the centre) in the direction perpendicular to the seam at a constant rate of elongation until the seam breaks. The maximum force at which the seam breaks is recorded. Test Standards & Methods. There are two common methods for testing the seam ...
This test method can also be used to determine either the sewn seam strength of textiles or the efficiency of a seam assembly with any given fabric. Addition...
Test the seam strength of the three test seams by trying to pull them apart. Make a note of which one is the strongest. If the strongest seam is the middle value (2mm stitch length) then you have hit the sweet spot on the first try! If the strongest seam is the 2.5mm stitch length, then you may want to re-test with a stitch length of 3mm.
ASTM and ISO have specified standard test methods and specifications for testing the seam strength of many textiles. Popular testing standards are ASTM D751 for coated fabrics, ASTM D1683 for woven apparel fabric, ASTM D4884 for geotextiles, ISO 10321 for geosynthetics, and ISO 13935 for fabric and made-up textiles, such as clothing apparel.