为您找到"
081113
"相关结果约100,000,000个
1.8 DELIVERY, STORAGE, AND HANDLING Deliver hollow-metal work palletized, packaged, or crated to provide protection during transit and Project-site storage. Do not use nonvented plastic. Provide additional protection to prevent damage to factory-finished units. Deliver welded frames with two removable spreader bars across bottom of frames, tack welded to jambs and mullions.
Just select the building type and opening location to see the most common door specifications based on your criteria and download a drawing. This is an example of a section 081113 Hollow Metal Doors and Frames specification for a healthcare facility. Included in this spec are standard doors and frames, fire-rated assemblies, sidelights, and more.
Installation Tolerances: Adjust hollow metal door frames for squareness, alignment, twist, and plumb to the following tolerances: Squareness: Plus or minus 1/16 inch (1.6 mm), measured at door rabbet on a line 90 degrees from jamb perpendicular to frame head. Alignment: Plus or minus 1/16 inch (1.6 mm), measured at jambs on a horizontal line parallel to plane of wall.
SECTION 081113 - HOLLOW METAL DOORS AND FRAMES Grout for frames set in masonry shall be Portland cement grout of maximum 4-inch slump for hand troweling; thinner pump-grade grout is prohibited.
081113 Hollow Metal Doors and Frames - Free download as PDF File (.pdf), Text File (.txt) or read online for free.
SUMMARY Section Includes: Standard and custom hollow metal doors and frames.
DESIGN GUIDELINE 081113 HOLLOW METAL DOORS AND FRAMES Scope Scope: Hollow metal doors and frames, interior and exterior applications.
3.2 INSTALLATION OF DOORS AND APPLICATION OF HARDWARE Install doors and hardware as specified in Section 081113, HOLLOW METAL DOORS AND FRAMES Section 081400, WOOD DOORS Section 087100, DOOR HARDWARE. - - - E N D - - -
Steel framing is the M.S.U. standard for all interior doorways, paired with flush wood doors. (See Division 8 section 081416 FLUSH WOOD DOORS), and for interior windows.
1.7 COORDINATION Units shall be identical to assemblies whose fire resistance characteristics have been determined in accordance with requirements specified, and shall be labeled and listed by UL, WHI, or other inspection and testing agency acceptable to the code authorities having jurisdiction. Fire-rated steel frames shall bear permanent labels attesting to fire resistance. At stairway ...