为您找到"
1.4571 X6CrNiMoTi17122
"相关结果约100,000,000个
DIN EN 1.4571 material (X6CrNiMoTi17-12-2) is austenitic stainless steel, datasheet, mechanical properties, heat treatment, chemical composition, equivalent
A 71 TECHNICAL DATA SHEET X6CrNiMoTi17-12-2 1.4571 PHYSICAL PROPERTIES Density in kg/dm3 8.0 Electrical resistivity at 20°C in (Ω mm2)/m 0.75 Magnetisability low1 Thermal conductivity
Ti = 5 * C to 0.7 Particular ranges of sulphur content may provide improvement of particular properties. For machinability a controlled sulphur content of 0.015 % to 0.030% is recommended and permitted.
X6CrNiMoTi17-12-2, 1.4571, AISI 316Ti - application and specification. X6CrNiMoTi17-12-2 / 1.4571 steel is austenitic grade stabilized with titanium, resistant to intergranular corrosion, pitting corrosion, most acids and salts in moderate concentrations.
EN 1.4571 stainless steel is an austenitic stainless steel formulated for primary forming into wrought products. 1.4571 is the EN numeric designation for this material.
AISI 316Ti is a titanium-stabilised austenitic stainless steel, also known as 1.4571, BS 320S18 & BS 320S31 and X6CrNiMoTi17-12-2. The material is characterised by its very good corrosion resistance (PREN value 23.1 to 26.7) in a natural environment with a low chlorine and salt content.
X6CrNiMoTi17-12-2, 1 4571, AISI 316Ti, UNS S31635 steel is austenitic grade stabilized with titanium, resistant to intergranular corrosion, pitting corrosion, most acids and salts in moderate concentrations It is characterized by relatively good strength. Search. e.g.17-4PH, PH13-8Mo, 422.
Steel Properties. 1.4571 is a stainless, austenitic chromium-nickel-molybdenum steel stabilized with titanium. AISI 316Ti is characterized by its good corrosion resistance in most natural waters (urban and industrial), provided that the concentrations of chloride, hydrochloric and hydrochloric acid are not too high.
Forging: During forging, preheating takes place between 1.150°C and 1.180°C. Thereafter, the material can be forged at 1.180°C and 950°C. The subsequent cooling takes place in water. Welding: 1.4571 can be welded by all common methods. No welding filler is required for this and no heat treatment is necessary after welding.
Stainless Steel 1.4571 contains a small amount of titanium (about 0.5%). It has good machinability but cannot be hardened by heat treatment.