为您找到"
APL – 5L – (SPL2)
"相关结果约100,000,000个
API 5L Grade B pipe is a common grade pipe for oil and gas pipeline transmissions. It also called L245 Pipe refer ISO 3183, named by minimum yield strength 245 Mpa (35,500 Psi). Equivalent material ASTM A106 B or ASTM A53 B, which have similar value on chemical composition, mechanical properties, and applications. ...
For other sizes refer to the full API 5L specification. CVN impact test for PSL2. Many PSL2 pipe sizes and grades require CVN. Seamless pipe is to be tested in the body. Welded pipe is to be tested in the body, pipe weld and heat-affected zone. Refer to the full API 5L specification for the chart of sizes and grades and required absorbed energy ...
Standard Scope: The scope of API 5L pipe mainly includes the application of the pipe for water and oil and gas pipeline transmission. Manufacturing types: The specification includes the manufacturing types as welded and seamless.Cast pipes are not covered in the specification. Pipes under 24″ are usually seamless or ERW, whereas large diameter pipes are SAW/DSAW.
The API 5L specification provides standards for pipe suitable for convering gas, water, and oil in the natural gas and oil industries. Our company offer a range of APL 5l steel pipe.including Gr A, Gr B, X42, X46, X52, X56, X60, X70, x80 ect.. Process specification language (SPL for short)fall into two classes,PSL1 and PSL2.They are different in inspection,Chemistry,mechanical properties.and ...
API5L 45th Edition Specification for Line Pipe Scope Specified the manufacture of two product levels (PSL1 and PSL2) of seamless and welded steel pipe for the use of a pipeline in
API 5L Grade B, is resistant to cracking under sulphide stress which makes them ideal for sour service. This pipe has a minimum yield strength of 245 Mpa or about 35500 psi. API 5L Grade. B has a long working lifespan which allows it to be very cost-effective. Grade. B PSL-2 pipes are rigid, have a compact structure and have very stable dimensions.
API 5L Specification for Line Pipe This Standard specifies requirements for the manufacture of two product specification levels (PSL 1 and PSL 2) of seamless and welded steel pipes for use in pipeline transportation systems in the petroleum and natural gas industries. This Standard is not applicable to cast pipe. A. Manufacturing :- 1.
It's a medium grade in API 5L and ISO 3183 specifications, used for oil and gas pipeline transmissions. API 5L X52 Pipe Types Ranges by Product Specification Level: PSL1, PSL2, Sour Services. API 5L X52 PSL1, for the pipes in common delivery condition of As Rolled. API 5L X52N/M/Q, for PSL2 pipe with delivery condition of N, M, and Q.
API 5L X65 PSL2 sour service pipe (X65QS/MS, L415QS/MS), C maximum is 0.10, Mn ≤ 1.45, Si ≤ 0.45, P ≤ 0.020, S ≤ 0.002, V ≤ 0.10, Nb ≤ 0.08, Ti ≤ 0.06, CEPcm ≤ 0.22. Sour service line pipe requires a strictly control on the chemical composition. So to protect pipe from corrosive environments like H2S, low carbon and low CEPcm ...
API 5L line pipe is suitable for oil and natural gas transportation. It includes seamless and welded pipes. API 5L steel pipe is divided into two product grades: PSL1 and PSL2. UNIASEN offers API 5L Line Pipes in various steel grades, including Gr. A, B, X42, X46, X52, X56, X60, X65, X70, X80. Each grade is tailored to specific applications and ...