为您找到"
CP210x USB to UART Bridge Controller
"相关结果约100,000,000个
The CP210x USB to UART Bridge Virtual COM Port (VCP) drivers are required for device operation as a Virtual COM Port to facilitate host communication with CP210x products. These devices can also interface to a host using the direct access driver.
Install the CP210x USB to UART Bridge Virtual COM Port drivers to program the ESP32 and ESP8266 NodeMCU. This guide covers how to install drivers on Windows PC.
CP210x USB to UART Bridge VCP Drivers - Silicon Labs Note: This is a non-Microsoft website. The page appears to be providing accurate, safe information. Watch out for ads on the site that may advertise products frequently classified as a PUP (Potentially Unwanted Products).
The Silicon Labs CP210x USB to UART is a small chipset that is used to upgrade devices that have a old style comm port rs-232 interface enabling them to be used with modern operating systems via a virtual comm port. Other devices will most likely come up under the same device ID's due to the fact that this was the quickest way to adapt current devices using physical comm ports over to USB ...
When working with devices that utilize the CP210x USB to UART Bridge Controller, it's crucial to install the correct driver on the host computer to ensure proper communication. The driver allows the operating system to recognize the connected CP210x device and provides the necessary interface for data transfer between the USB and UART domains.
Hello, Using a USB to UART Bridge with CP2102 chipset on Windows 10 Home Version 10.0.19043 Build 19043. Installed CP210x 10.1.10 driver. VID_10C4&PID_EA60 Upon installing the device, the Add Hardware Wizard states: The following hardware was installed: Silicon Labs CP210x USB to UART Bridge.
Go to the Silicon Labs CP210x USB-to-UART Bridge VCP Drivers download page. Download the virtual COM port (VCP) driver for your operating system to your PC. See the following figure. Figure 1. Silicon Labs CP210x Driver Download Page Page-1 Sheet.1 Extract the ZIP archive file. Open the extracted file and select the executable file that is compatible with your PC. For example, for Windows 64 ...
The CP210x USB chip converts a USB connection into a serial port, enabling communication between your computer and microcontrollers like the ESP32 or ESP8266. To program or exchange data, you must install the CP210x USB to UART Bridge Virtual COM Port drivers.
The package provides the installation files for Fujitsu CP210x USB to UART Bridge Driver version 6.7.1.0. If the driver is already installed on your system, updating (overwrite-installing) may fix various issues, add new functions, or just upgrade to the available version.
The CP210x USB to UART Bridge Virtual COM Port (VCP) drivers are required for device operation as a Virtual COM Port to facilitate host communication with CP210x products. These devices can also interface to a host using the direct access driver.