为您找到"
ch375
"相关结果约100,000,000个
WCH is an IC design company that designs chips based on self-developed professional interface IP and microprocessor IP. Its main products include USB/Bluetooth/Ethernet interface chips and connected/interconnected/wireless MCUs, which focus on connectivity, networking and control.
CH375是一款USB-HOST&DEVICE通用接口芯片，支持主从USB应用，动态切换，内置通讯协议固件，提供U盘文件系统库。
Product Description Description CH375 CH375B is a universal interface chip of USB bus. It has an 8-bit data bus and read, write, chip select control lines and interrupt output. It can be easily connected to the system bus of microcontrollers, DSPs, MCUs, MPUs, and other controllers.
CH375 is a USB bus universal interface chip that supports USB-HOST and USB-DEVICE modes. It can communicate with USB devices, configure special protocols for Mass-storage, and adjust serial communication baud rate.
The CH372 facilitates USB-to-SPI communication, while the CH375 supports USB host and peripheral modes, aiding in USB flash drive interfacing. The CH376 serves as a bridge for USB-to-SD card communication, expanding storage capabilities. Additionally, the CH378 extends functionality with USB-to-parallel printer interfacing.
CH375 Datasheet. Part #: CH375. Datasheet: 244Kb/15P. Manufacturer: Nanjing Qinheng Microelectronics Co., Ltd.. Description: USB Bus Interface ChIp. 3 Results. Part ...
The CH375 USB Storage Module adds USB storage to any RomWBW or Fuzix based RC2014 kit. This module is based around the work Alan Cox did with integrating the CH375 / CH376 modules in to Fuzix and subsequently by Wayne Warthen adding the support to RomWBW from v3.4.0 onwards.
CH375 is a USB bus universal interface chip, supports USB-HOST Mode and USB-DEVICE/SLAVE Mode. There are 8-bit data bus and read, write, chip select control wire and interrupt output in CH375.It is convenient to link CH375 to control system bus of MCU/DSP/MPU.CH375 also provides serial communication in USB-HOST mode.
Get info, images and drivers for the WCH CH375B (USB Bus Interface) chip
CH375 has Bulk-Only transport protocol for Mass-Storage devices. For USB Storage devices using CBI transport protocol, the external MCU still needs to process based on the command ISSUE_TOKEN or ISSUE_TKN_X and the control transmission command.