为您找到"
eu1ky
"相关结果约100,000,000个
The EU1KY antenna analyzer V3 is an open source project to build your own, reasonably cheap but very functional antenna analyzer that is a handful tool for tuning coax-fed shortwave ham radio and CB antennas.
The EU1KY FAA-450 analyzer is very different from other antenna analyzers, there is no buttons, switches, tuning pots on the unit, and all of the operations are through the touch screen When the unit is switched ON, the main screen displays 'EU1KY antenna analyzer V.3' shortly, then goes to the main menu, where we can access all of the ...
4. Antenna Analyzer (EU1KY) - How to Setup and Calibration The setup and calibration methods are the same for most firmware, Only the menu position is different. I will use AA Firmware CEC version for convenience. (AA firmware CEC Version will be released within one week.) I am planning several series about the EU1KY antenna.
For less than $200 the EU1KY AA-450 Kit is a very capable and inexpensive Antenna Analyzer. In terms of performance per dollar this kit beats any 8-bit microcontroller based antenna analyzer.
EU1KY Antenna Analyzer V3 This is a port of eu1ky_aa_v3 for STM32H745I DISCOVERY board
The FAA-450 Antenna Analyzer is an open source project built from STM32-F7 Discovery board. This project originated from "EU1KY Antenna Analyzer V3", which features with BIG COLOR TFT LCD, CAPACITIVE TOUCHSCREEN, HF/VHF (UHF) frequency coverage, built-in TDR function, and multiple scanning curves besides with SWR.
Antenna Analyzer(EU1KY) - How to Firmware Update You can easily find some Firmware for Antenna Analyzer(EU1KY) on the internet. I will al...
World's leading amateur radio web site with news, technical articles, discussions, practice exams and more.
This page is a description of the modifications made to the EU1KY antenna analyzer project.
EU1KY - Analysator - 1.4 English PDF The document provides instructions for configuring and using an antenna analyzer software created by EU1KY. It describes how to [1] calibrate the oscillator, [2] configure main settings, [3] take impedance measurements at single frequencies or across sweeps, and [4] use additional tools.