为您找到"
fcm36
"相关结果约100,000,000个
FCM 36 was a French light infantry tank developed in the 1930s and used in World War II. It had a diesel engine, welded sloped armour and a 37 mm gun, but was expensive and only produced in small numbers.
The FCM 36 tanks were spread between two units, the 4th and 7th BCCs, also named BCLs (Bataillon de Chars Légers - Eng: Light Tanks Battalion) or even BCLM (Bataillon de Chars Légers Modernes - Eng: Modern Light Tank Battalion). However, they were generally called BCC, like all other French tank battalions. ...
The FCM.36's well-sloped armour makes it a tad beneficial for long-range combat, but the underperforming gun makes the FCM.36 act more like a shield rather than a spear. The FCM.36 does have marginally better mobility than the H.35 with better handling and a more powerful engine, allowing it to turn smoothly and reach its top speed fairly ...
The FCM 36 was a modern and promising design, but suffered from mechanical problems and obsolete armament. It was the last infantry tank accepted by the French Army before WW2, and saw action in the Battle of France in 1940.
The FCM36 was a French light tank with sloped armour, welded hull and diesel engine, but it failed to enter production due to technical issues. Learn about its design, trials and fate in this article.
The FCM 36 was the first French tank to use a diesel engine. The 8.4 liter Berliet water-cooled engine could reach a maximum speed of 15 miles per hour (24kph) and a had a maximum range of about 140 miles (225km) A 1.46 inch (37mm) low-velocity gun was the FCM 36's main armament. This infantry tank also had a 0.297 inch (7.55mm) machine gun ...
The FCM 36 was part of the Hotchkiss H35 and Renault R35 light tanks in the French Army's inventory of 1935-1936. Although the competitor's manufacturing costs were relatively low compared to the FCM 36, the FCM product offered hope to the French authorities in the long run, with additional experiments on the chassis even while serial ...
Tank Char FCM 36, built by the Forges et Chantiers de la Méditerranée in 1936, was a 12 ton light infantry tank. Armament: 37 mm L/21 gun and 7.5 mm MG. In June 1934 French Army launched a competition for a light tank, the successor to the outdated tank Renault FT-17 derived from the First World War. Of the 14 projects army selected five.
The FCM 36 Origins recounts how the tank was born from the same competition that begat the R35 and H35. The FCM was ground-breaking in mounting their own turret design (instead of the standard APX turret), using welded construction (instead of cast or bolted), mounting the transmission in the back to provide an unobstructed combat compartment ...
The FCM-36 infantry tank was presented in 1936 and had innovations such as the use of welded rolled steel plates instead of cast hull and turret. They also had a diesel engine that allowed them to operate more than 16 hours instead of the usual 8 hours of gasoline engines. Armored skirts were mounted on the sides to protect the tracks and for the first time, protection against chemical gases ...