为您找到"
ups nas
"相关结果约100,000,000个
All of the devices come with a USB cable to ensure your NAS can communicate with the UPS and properly shut down. CyberPower CP1500PFCLCD: Best Overall UPS This is a device that has six total battery backup outlets and is one of my new favorites due to the fact that it is a PFC Sinewave device for a reasonable price.
2. Choose a UPS. For example, if the total wattage required for your devices is 650 W and the output power factor of a UPS is 70%, you should select a UPS with output power greater than 930 W. Output power is calculated as follows: Output power = Total wattage of your devices / Output power factor of a UPS. Therefore, following our example:
Best UPS for NAS Buying Guide. NAS is a storage technology that is beneficial for small businesses and home usage as it has high storage capacity. So when using this service, constant electricity is required so there is a need for UPS as power can have surging issues. Hence, we listed some of the best UPS that can be used to power NAS.
Best UPS for an 8-12-Bay NAS Drive for Medium Large Business and Video/Photo Editors. For much more modest Synology or QNAP NAS setups, as well as factoring in additional home/office equipment I would recommend the following UPS Device. 8-12 HDD NAS Drive with 250-350W PSU;
A gaming PC can take as much as 1000 W, which would overload the UPS. A NAS will barely hit 50 W, let alone meet any of the capacities of my recommended power supplies. Why you should buy a UPS for NAS Setting up a UPS in Synology DSM 7. (Source: NM) A NAS needs to shut down safely to ensure no loss of data.
5 Best SSDs for NAS in 2024 SSDs are fast becoming the preferred medium for adding storage to a NAS. 6 Best UPS for Wi-Fi Routers and Modems A dedicated UPS can prevent internet downtime if your ...
Then within a NAS you can set the rules what happens wen electricity is gone. There is always Cheap, cheaper and cheapest UPS- what matters is the time it will last without power. The cheapest UPS for Synology & Qnap NAS is CyberPower VALUE 600EILCD Value Series Uninteruptible Power Supply
The NAS is hooked up to the UPS via a USB cable detects when Stand-by mode is required. You also need a UPS powerful enough to handle the Amps/Watts the device uses. Check the NAS Product Specifications for power consumption info. DS1522+ info below.
On the UPS tab, check the Enable network UPS server box to allow the Synology NAS to relay UPS information to the client Synology NAS. Click the Permitted Synology NAS Devices button. On the window that appears, enter the IP addresses of the other Synology NAS that is using the UPS device, but not connected via USB or the network. Click OK.
An Easy Guide to Buying the Right UPS for your NAS System The appeal of a UPS has grown substantially in recent years, not just for business users either, with an increasing number of home users in limited power setups (houseboats, pop-up offices and mobile homes) the utility of a safety net for your power consuming devices is inarguable.